Gear Rougher

Specifications:

Capacity:

Pitch Diameter (Maximum)

            10 to 1 Ratio....................................10 ½”  

            2 ½ to 1 Ratio..................................9-3/8”

Diametral Pitch (coarsest).........................2-1/2 D.P.

Extreme ratio (minimum)                                  2 ½ : 1

Face Width (maximum)                                     1-5/8”

Full Depth (maximum)                                        .750”

Number of Teeth                                            20 - 150

Work Spindle

Diameter of Taper hole at large end                3-27/64”

Taper per Foot                                                      ½”

Depth of Taper                                                    5/8”

Cutting Diameters                          5”, 6”, 7-1/2” & 9”

Feeds and Speeds

Cutter Speeds (per min.)                               82’ – 215’

Feeds ( seconds per tooth)                                  2 – 10

Electrical Equipment                                     60 CYCLE

Main Motor                                        7.5 HP  1800 RPM

Hydraulic Motor                                   3 HP   1800 RPM

Coolant Motor                                    1 ½ HP 1800 RPM

Magnetic Chip Seperator                     1/8 HP 1800 RPM

Floor Space:  92” x 75” x 80”H

Weight (approx.)             13,500 LBS