Gear Generator

Machine Parts

Diameter of Pilot..........................................1-3/4"

Angle of Expander on Pilot 30 degrees

Dies

Outside Diameter of Upper Die.............................16"

Outside Diameter of Lower Die........................17-3/4"

Distance from Bottom of Upper Die holder

to top of Lower Die Holder

OPEN 16-1/2"

Closed 4-5/8"

Oil Supply

Machine Capacity.........................................250 gal

Size of Oil Inlet.................................................2"

Size of Oil Outlet...............................................3"

External oil Supply required: (gallons per min.)...........35

Air Supply

Compressed Air Pressure Required

Free Air per Minute (approx.)..........................25 cu ft

Air Storage tank Capacity required...................30 cu ft

Airline Pressure recommended (approx.)..............90 LBS

Size of Air Inlet................................................¾"

Electrical

Pump Motor.................................7-1/2 HP 3600 RPM

Torque Motor.............................200 inch lbs 600 RPM

Floor Space

36" x 70" x 80"H