Gear Rougher

Specifications:

Capacity:

Pitch Diameter (Maximum)

            10 to 1 Ratio.....................................10 ½”  

            2 ½ to 1 Ratio...................................9-3/8”

Diametral Pitch (coarsest)..........................2-1/2 D.P.

Extreme ratio (minimum)...............................2 ½ : 1

Face Width (maximum)..................................1-5/8”

Full Depth (maximum)...................................  .750”

Number of Teeth........................................20 - 150

Work Spindle

Diameter of Taper hole at large end................3-27/64”

Taper per Foot................................................½”

Depth of Taper..............................................5/8”

Cutting Diameters.........................5”, 6”, 7-1/2” & 9”

Feeds and Speeds

Cutter Speeds (per min.).............................82’ – 215’

Feeds ( seconds per tooth)...............................2 – 10

Electrical Equipment..................................60 CYCLE

Main Motor....................................7.5 HP  1800 RPM

Hydraulic Motor................................3 HP   1800 RPM

Coolant Motor.................................1 ½ HP 1800 RPM

Magnetic Chip Separator.....................1/8 HP 1800 RPM

Floor Space....................................92” x 75” x 80”H