Gear Rougher

Located in Buenos Aires, Argentina

Capacity:

Pitch Diameter (Maximum)...................................10 to 1 Ratio 10 ½"

2 ½ to 1 Ratio 9-3/8"

Diametral Pitch (coarsest).............................................2-1/2 D.P.

Extreme ratio (minimum)...................................................2 ½: 1

Face Width (maximum)......................................................1-5/8"

Full Depth (maximum)..........................................................750"

Number of Teeth...........................................................20 - 150

Work Spindle

Diameter of Taper hole at large end...................................3-27/64"

Taper per Foot....................................................................½"

Depth of Taper..................................................................5/8"

Cutting Diameters.............................................. 5", 6", 7-1/2" & 9"

Feeds and Speeds

Cutter Speeds (per min.)................................................82’ – 215’

Feeds (seconds per tooth)...................................................2 – 10

Electrical.Equipment.60.CYCLE

Main Motor........................................................7.5 HP 1800 RPM

Hydraulic Motor.....................................................3 HP 1800 RPM

Coolant Motor....................................................1 ½ HP 1800 RPM

Magnetic Chip Separator........................................1/8 HP 1800 RPM

Floor Space.........................................................92" x 75" x 80"H