Makino A100E - Horizontal Machining Centers

NEW IN 2007 OPERATING HOURS – 6,651 (AS OF 2/2011) CUTTING HOURS – 4,415 (AS OF 2/2011) SPINDLE ON HOURS – 6,901 (AS OF 2/2011) SPECIFICATIONS MACHINE PALLET SIZE: 39.4” X 39.4” X-AXIS TRAVEL: 66.9” Y-AXIS TRAVEL: 53.1” Z-AXIS TRAVEL: 55.1” SPINDLE CENTER TO TOP OF PALLET: 3.9” – 57.1” SPINDLE NOSE TO CENTER OF PALLET: 2.75” – 57.9” SPINDLE DRIVE MOTOR: 40 HP/ 34 HP (30 MIN / CONT) FLOOR SPACE: 212” X 394” WEIGHT: 66,000 LBS (APPROX) WORK ZONE LIMITATIONS: 74.8” X 59.1” BED CONSTRUCTION: ONE PIECE MEEHANITE CASTING THREE POINT LEVELING NUMBER OF GUIDES (X & Z-AXES): 2 DISTANCE BETWEEN GUIDES (X-AXIS): 34.1” DISTANCE BETWEEN GUIDES (Z-AXIS): 53.5” LENGTH OF LINEAR GUIDE TRUCK (X &Z-AXES): 8.15” TABLE (Z-AXIS) ACCELERATION: 0.4 G TIME TO FULL RAPID: 410 MSEC DISTANCE TO FULL RAPID: 6.7” RAPID TRAVERSE: 1,968 IPM FEED RATE: 1,968 IPM THRUST CAPACITY: 5,619 LBS TYPE OF DRIVE: AC DIGITAL SERVO MOTOR BALL SCREW DIAMETER: 1.77” X 2 AXIS MOTOR: 6.4 HP X 2 SPINDLE HEAD (Y-AXIS) ACCELERATION: 0.4 G TIME TO FULL RAPID: 320 MSEC DISTANCE TO FULL RAPID: 5.35” RAPID TRAVERSE: 1,968 IPM FEED RATE: 1,968 IPM THRUST CAPACITY: 3,109 LBS (UP/DOWN) TYPE OF DRIVE: AC DIGITAL SERVO MOTOR BALL SCREW DIAMETER: 1.96” X 2 AXIS MOTOR, TWIN: 6.4 HP X 2 TRAVELING COLUMN (X-AXIS) CONSTRUCTION: ONE PIECE MEEHANITE NUMBER OF GUIDES (X-AXIS): 2 SIZE OF GUIDES (Z-AXIS): 8.15” DISTANCE ACROSS GUIDES (Y-AXIS): 22.1 ACCELERATION: 0.4 G TIME TO FULL RAPID: 428 MSEC DISTANCE TO FULL RAPID: 7” RAPID TRAVERSE: 1,968 IPM FEED RATE: 1,968 IPM TYPE OF DRIVE: AC DIGITAL SERVO MOTOR BALL SCREW DIAMETER: 2.16” AXIS MOTOR: 7.9 HP INDEX/PALLET TRAVEL WORK PIECE POSITIONING ON PALLET: 24-M16 TAPPED HOLES, 2 PRECISION EDGE LOCATORS PALLET/TABLE POSITIONING RANGE: 360,000 DEGREES, BI-DIRECTIONAL PROGRAMMING INCREMENT: 1 DEGREE POSITIONING METHOD: CURVIC COUPLING PALLET CHANGE TIME: 35 SECONDS PALLET LOAD CAPACITY: 6,600 LBS DISTANCE FLOOR TO PALLET TOP: 59.1” SPINDLE SPINDLE NOSE: 50 TAPER TOOLING: CAT V-FLANGE RETENTION STUD: MAS 1 TOOL CLAMP FORCE: 4,406 LBF SPINDLE SPEED RANGE: 20-12,000 RPM SPINDLE SPEED RANGES: 2 (INTEGRAL MOTOR / ELECTRONIC GEAR) MAXIMUM HP: 40 HP OBTAIN FULL HP: 2,500 RPM MAXIMUM TORQUE, 25% ED @ 600 RPM: 310 FT/LBS MAXIMUM TORQUE, CONTINUOUS @ 600 RPM: 176 FT/LBS AUTOMATIC TOOL CHANGER CAPACITY: 132 TOOLS TOOL CHANGE TIME: 1.7 SEC CHIP-TO-CHIP TIME: 5.5 SEC TOOL SELECTION METHOD: RANDOM EQUIPPED WITH MAKINO PROFESSIONAL 3 CONTROL CHIP BLASTER JV10 HIGH PRESSURE THROUGH COOLANT SYSTEM ATC 132 TOOL OPTION TRANSFORMER CHIP CONVEYOR CHILLER NOTE: ORIGINAL SALES PRICE WAS APPROXIMATELY $1,100,000.00 0 IN 2006