Equipped With:
SPINDLE CONFIGURATION.........ANSI A2-R"
HOLE THROUGH SPINDLE..........1.875"
16C COLLET CAPACITY...........1-5/8"
SPINDLE SPEED RANGE...........50 TO 5000 RPM
AC SPINDLE DRIVE
(30-MINUTE RATING)...........10 HP
MAXIMUM SWING OVER BEDWAY.....14.000"
MAXIUMU THREADING DIAMETER....8,000"
MAXIMUM TURNING DIAMETER......8.000"
MAXIMUM FIXTURE DIAMETER......9.000"
MAXIUM ALLOWABLE WEIGHT
ON SPINDLE.................75 LBS.
TURRET- NUMBER OF STATTIONS.8
SQUARE TOOL SIZE (STANDARD).1/2
ROUND TOOL DIAMETER
(STANDARD).................UP TO 3/4"
MAXIMUM X-AXIS TRAVEL.......4.500"
MAXIMUM Z-AXIS TRAVEL.......12.00"
MAXIMUM X-AXIS TRAVERSE
RATE.......................400 IPM
MAXIMUM Z-AXIS TRAVERSE
RATE.......................400 IPM
MAXIMUM DISTANCE FROM
TURRET FACE TO SPINDLE.....12.500"
INDEXING TIME
(STATION 1 TO 8)...........2 SECONDS
INDEXING TIME
(STATION TO STATION)......1 SECOND
LEAST INPUT INCREMENT.......0.00010
LEAST COMMAND INCREMENT....0.00010
COMPRESSED AIR REQUIREMENT..70 MIN. TO 90 MAX. PSI 5 TO 6 SCFM
MAX. RECOMMENDED AMBIENT
OPERATING TEMPERATURE......113 DEG. F
COOLAND PUMP CAPACITY.......30 U.S. GAL
APPROX. SKIDDED WEIGHT......6000 LBS.
MACHINE DIMENSIONS..........91.500" L X 65" D X 66" H
HEIGHT WITH GUARD DOOR
RAISED.....................89.750"
ELECTRICS:..................220 VOLTS, 3 PH, 60 CYC
EQUIPPED WITH:
GN SEIMENS 810T CONTROL
PARTS CATCHER
VERTICAL CUTOFF SLIDE
The Hardinge CHNCI is an exclusive part of our Horizontal Lathes inventory which we own and service. We're the international CNC specialists with the best guarantee in the industry.
