Equipped With:
MANUFACTURED IN 2008
INSTALLED IN 2009
Machine Specifications
BTH-130.R24
Travel
X-axis travel (Cross movement of table)
mm (in)
3 000 (118)
Y-axis travel (Vertical movement of spindle head)
mm (in)
2 300 (90.5)
Z-axis travel (Longitudinal movement of table)
mm (in)
1 500 (60)
W-axis travel (Spindle extension)
mm (in)
700 (28)
Distance from table surface to spindle center
mm (in)
900 to 2 400 (35.4 to 95.4)
Distance from table center to milling spindle gauge plane
mm (in)
0 to 2 300 (0 to 90.5)
Table
Table working surface
mm (in)
2 000 x 2 400 (78.7 x 94.4)
Table loading capacity
kg (lbs)
20 000 (44 000)
Table surface configuration (Pitch to T-slots 160 mm
(6.2 in), size 22 mm (0.86 in)
13 T-slots
Minimum table indexing angle (B- axis)
degrees
0.0001
Spindle
Spindle diameter
mm (in)
130 (5.1)
Spindle speed range
min
5 ~ 2 500
Feedrate
Rapid traverse rate
X, Y Z
mm/min (ipm)
14 000 (551.1)
W
mm/min (ipm)
5 000 (196.8)
B
deg/min
500
Feedrate
X, Y Z
mm/min (ipm)
1 to 7 000 (0.04 to 275.5)
Automatic tool changer (ATC)
Type of tool shank
MAS BT50
Tool storage capacity
120 tools
Spindle drive motor
(30 min./cont. rating)
kW (HP)
AC22/18.5 KW (AC30/25 HP)
]
Machine size
Machine height
mm (in)
5 060 (199.2)
Floor space
mm (in)
7 250 x 6 950 (285.4 x 273.6)
Mass of machine (including NC equipment)
kg (lbs)
45 000 (99 000)
Accuracy
Positioning accuracy
X, Y, Z
mm/min (ipm)
+/-0.016 (+/-0.00063)/full length
W
mm/min (ipm)
+/-0.012 (+/-0.00047)/full length
Repeatability
X, Y, Z
mm/min (ipm)
+/-0.007 (+/-0.00027)
W
mm/min (ipm)
+/-0.008 (+/-0.00031)
EQUIPPED WITH:
ATC Magazine capacity—120 tools
Taper—BT 50
Table--full NC “B” axis indexing to 0.0001 degree
Spindle speed—5 to 2,500 rpm
Control--TOSNUC 999 interactive with pendant control
Coolant--flood coolant; chip conveyor
Full table enclosure
The Toshiba Motors BTH130-R24 is an exclusive part of our Horizontal Boring Mills (Table) inventory which we own and service. We're the international CNC specialists with the best guarantee in the industry.
