Mazak SQT10MS - Lathes (3-Axis or More)

YEAR NEW.......... 1994 Max. Swing.....................................................................17.1" Max. Machining Diameter..............................................9.06" Distance Between Standard Chuck Jaws of Main & 2nd Spindle..................17.9" Max. Bar Work Diameter...............................................1.65" X-Axis Stroke...................................................................6.3" Z-Axis Stroke...................................................................17.93" Spindle Speed...................................................................35 - 6000 RPM Main Spindle Nose...........................................................A2-5 Spindle Bore.....................................................................2.05" Min. Spindle Indexing Increment.....................................0.001 Degree / 360,000 Positions Turret Type.......................................................................Dodecagonal Drum Turret Tool Capacity.........................................................12 / Modified VDI 2nd Spindle Speed.............................................................180 - 6000 RPM Rotary Tool Speed.............................................................120 - 3000 RPM Rapid Traverse Rate X & Z Axis........................................................................1180 IPM C Axis................................................................................100 RPM B Axis................................................................................708 RPM Main Spindle Drive (30 Min)............................................. AC 15 HP 2nd Spindle Drive (10 Min)............................................... AC 7.5 HP Rotary Tool Drive (10 Min)............................................... AC 3 HP Floor Space Requirements.................................................105.3" x 57.7" Machine Weight................................................................. 8,490 Lbs. EQUIPPED WITH: Mazatrol T-32-3J Control Tool Eye System 6 Inch Chuck on Main Spindle 5 Inch Chuck on Sub Spindle Synchronized Spindles (3 Milling Heads. 2-Horizontal, 1-Vertical) Auto Cell System Including Chucker Cell with Pitch Feed Conveyor Package: GL50-N Gantry Robot Robot Hand Type “D1” Robot Hand Jaw Type “A” Pitch Feed Conveyor With 5 Pallets for Chuck Work Robot Interface Automatic Top Door Open/Close Automatic Chuck Jaws Open/Close Chuck Air Blast (Main and Second Spindles) Auto Power Off (Breaker Trip) MAC GL Robot Controller With Teach Pendant Chip Conveyor Operation Status Lights Safety Fence